Auto >> AutoSPT >  >> Engine

Where is the PVC valve in a 2004 suzuki forenza?

2.0l engine:

1. Open the hood of the vehicle.

2. Locate the engine block. It is the large metal block in the front of the engine compartment.

3. Find the valve cover. The valve cover is located on the top of the engine block. It is usually made of metal and has the words "VALVE COVER" stamped on it.

4. Remove the valve cover bolts. There are usually four or six valve cover bolts. Use a wrench to loosen and remove the bolts.

5. Remove the valve cover. Once the valve cover bolts removed, the valve cover can lift off the engine block.

6. Locate the PCV valve. The PCV valve is a small cylindrical device with a hose attached to it. It will usually locate near the front of the engine block, under the valve cover.

7. Remove the PCV valve. Use a wrench to loosen and remove the PCV valve from the engine block.

8. Install the new PVC valve. Screw the new PCV valve into the engine block by hand until it is snug. Then use a wrench to tighten the valve until it is secure.

9. Replace the valve cover. Place the valve cover back on the engine block and replace the valve cover bolts. Tighten the bolts until they are snug.