Auto >> AutoSPT >  >> Engine

How do you replace the fuel door release lever on a gen 7 celica?

1. Locate the fuel door release lever. It is usually located inside the driver's door, on the left side.

2. Remove the door panel. This can be done by removing the screws that hold the panel in place.

3. Locate the fuel door release cable. It may be attached to the door handle or to a latch mechanism near the door lock.

4. Disconnect the cable. This may involve removing bolts or pins that are securing it in place.

5. Reconnect the cable to the new lever. Make sure that it is securely fastened so that it won't come loose.

6. Reattach the door panel.

7. Test the fuel door release lever. It should open smoothly when the release button inside the door is pressed.

Auto Repair
How to check U-Joints Why Repairing a Head Gasket Leak Is Both Easier and Harder Than You Think
Car Care
How Many Speakers Do You Need for Your Car? Does USAA car insurance offer discounts for military personnel? When to Use (and Not Use) Your Car’s Hazard Lights
Engine
Can you use nondetergent oil in a ride on lawn mower with Briggs and Stratton engine? Do ford F150 pickup trucks have something called a fuel valve switch to control the flow of gas between tanks?
Electric Car
Heater core change 1972 corvette with AC? What is the alternator clock position on a late 1986 corvette? What is the towing capacity or rating for Chevy S-10?
Autopilot
What motorcycle was used in the first terminator? How long to change a cranksharft sensor on Renault espace?
Car Photos
What was Henry fords first car he made? What does a 1991 Eagle Summit sedan look like? Why does your car shake when you first start it up in the morning or its cold?