Here is a general outline of the steps involved:
1. Research and obtain the necessary parts:
- Turbo engine: You will need to source a turbo engine that is compatible with the MR2's drivetrain and engine management system.
- Turbocharger: If the engine does not come with a turbocharger, you will need to purchase and install one.
- Intake and exhaust manifolds: You will need to fabricate or modify the intake and exhaust manifolds to fit the turbocharger.
- Downpipe: You will need to fabricate or modify the downpipe to connect the turbocharger to the exhaust system.
- Charge piping: You will need to fabricate or purchase charge piping to connect the turbocharger to the intake manifold.
- Intercooler: You will need to install an intercooler to cool the compressed air from the turbocharger before it enters the engine.
- Oil feed and drain lines: You will need to fabricate or purchase oil feed and drain lines for the turbocharger.
- Boost control system: You will need to install a boost control system to regulate the boost pressure from the turbocharger.
- Engine management system: You may need to modify or upgrade the engine management system to accommodate the turbocharger.
2. Prepare the engine bay:
- Remove the non-turbo engine and all associated components.
- Clean and prepare the engine bay for the new engine.
3. Install the turbo engine:
- Mount the turbo engine into the engine bay.
- Connect the engine mounts, transmission, and other driveline components.
- Connect the fuel and electrical systems.
4. Install the turbocharger and associated components:
- Install the turbocharger, intake and exhaust manifolds, downpipe, charge piping, intercooler, and oil feed and drain lines.
- Connect the boost control system to the turbocharger.
5. Modify or upgrade the engine management system:
- If necessary, modify or upgrade the engine management system to accommodate the turbocharger.
6. Tune the engine:
- Once everything is installed, you will need to tune the engine to ensure proper operation and performance. This may require the use of a professional engine tuner or dyno.
7. Test drive and troubleshoot:
- Test drive the vehicle and make any necessary adjustments or modifications to ensure proper performance and reliability.
It is important to note that this process is complex and requires a high level of technical expertise and fabrication skills. If you are not confident in your ability to perform this type of work, it is recommended that you consult with a professional automotive technician or performance shop.
