* A set of fog lights for Astra H
* A drill
* A jigsaw
* A screwdriver
* A wire stripper
* A crimping tool
* Electrical tape
* Zip ties
Instructions:
1. Prepare the front bumper. You will need to remove the front bumper in order to install the fog lights. To do this, follow these steps:
* Open the hood and remove the four screws that hold the bumper in place.
* Remove the two screws that hold the bumper in place at the wheel wells.
* Gently pry the bumper away from the car, starting at the sides and working your way towards the center.
* Disconnect the electrical connectors for the fog lights and the turn signals.
* Remove the bumper from the car.
2. Cut out the holes for the fog lights. Use the jigsaw to cut out the holes for the fog lights in the front bumper. The holes should be approximately 100mm x 100mm.
3. Mount the fog lights. Place the fog lights in the holes and secure them in place with the screws that came with the kit.
4. Connect the electrical wiring. Connect the electrical wiring for the fog lights to the electrical connectors that you disconnected earlier.
5. Test the fog lights. Turn on the fog lights and make sure that they are working properly.
6. Reinstall the front bumper. Reinstall the front bumper in the reverse order that you removed it.
Congratulations, you have now successfully installed fog lights on your Astra H!
