1. Gather Tools and Materials:
- You'll need a set of wrenches, sockets, screwdrivers, a clutch alignment tool, and possibly a transmission jack.
2. Safety First:
- Make sure the engine is cool and the car is in Park or Neutral. Engage the parking brake and chock the wheels.
3. Remove Transmission:
- You'll need to remove components such as the battery, battery tray, air filter assembly, and engine undertray to access the transmission. Follow the manufacturer's service manual for specific instructions on your model.
- Unbolt and remove the driveshafts and any additional components that may be attached to the transmission.
- Disconnect the speed sensor, reverse light switch, and other electrical connections.
- Support the transmission with a transmission jack or similar device.
- Remove the transmission mounting bolts and carefully lower the transmission from the car.
4. Remove Old Clutch:
- Once the transmission is out, you can access the clutch assembly.
- Remove the bolts holding the pressure plate in place.
- Take off the pressure plate and clutch disc, being careful not to drop any components into the flywheel or bell housing.
- Inspect the flywheel for any damage or wear.
5. Install New Clutch:
- Check the dimensions of the new clutch disc to ensure it's the correct size.
- Align the new clutch disc with the splines on the input shaft using a clutch alignment tool.
- Install the pressure plate and attach it with the bolts you removed earlier. Make sure to tighten them evenly in a star pattern.
6. Reinstall Transmission:
- Carefully lift the transmission back into place and reattach it to the engine mounts.
- Reinstall the driveshafts and any other components you previously removed.
- Make sure to connect any electrical connections and sensors you may have disconnected.
7. Bleed Clutch System:
- Your Renault Scenic may have a self-bleeding clutch system, or it may require manual bleeding. Refer to the service manual for instructions on how to bleed the clutch.
8. Test the Clutch:
- Start the engine and let it idle. Put the car in gear and slowly release the clutch pedal. The car should move forward smoothly without any jerking or slipping.
Note:
Please keep in mind that these steps are general guidelines and the actual process may vary based on the specific year, model, and drivetrain of your Renault Scenic. It's highly recommended to consult the vehicle's service manual or seek assistance from a professional mechanic if you're not familiar with mechanical repairs.
