**Step 1: 50 Nm (4 ft/lbs) In Sequence
Step 2: 70 Nm (5 ft/lbs) In Sequence**
The cylinder head bolt tightening sequence for a 1996 Honda Accord 22 is as follows:
1. 5
2. 1
3. 3
4. 2
5. 4
NOTE: The cylinder head bolts must be tightened in two steps, and a new cylinder head gasket must be used.
1. Tighten the cylinder head bolts to 50 Nm (4 ft/lbs) in the sequence shown.
2. Let the engine cool down to room temperature.
3. Tighten the cylinder head bolts to 70 Nm (5 ft/lbs) in the same sequence.
NOTE: Always follow the torque specifications and tightening sequence provided by the vehicle manufacturer to avoid damaging the engine.
