1. Park the golf cart on a level surface, engage the parking brake, and turn off the engine.
2. Disconnect the negative (black) battery terminal.
3. Remove the two bolts holding the generator to the engine block.
4. Remove the old belt from the pulleys.
5. Install the new belt by looping it over the pulleys. Ensure the belt is properly seated in the pulley grooves.
6. Re-install the two bolts to secure the generator to the engine block.
7. Tighten the bolts until they are snug.
8. Reconnect the negative battery terminal.
9. Start the engine and let it run for a few minutes. Check that the belt is running smoothly and that the charging system is working properly.
Here are some additional tips for changing the generator belt on a G22A Yamaha Golf Car Gas:
* Use only a Yamaha-approved generator belt.
* When installing the new belt, ensure it is routed correctly around the pulleys.
* Do not over-tighten the generator mounting bolts.
* Check the belt tension periodically and adjust it if necessary.
