To set the camshaft timing on the 2.0L Daewoo Nubira engine, you will need to:
* Remove the timing belt cover.
* Rotate the crankshaft until the piston in cylinder number one is at top dead center (TDC).
* Align the timing marks on the camshaft sprockets with the marks on the cylinder head.
* Install the timing belt.
* Tension the timing belt according to the manufacturer's specifications.
* Install the timing belt cover.
Here are the detailed instructions for setting the camshaft timing on the 2.0L Daewoo Nubira engine:
1. Remove the timing belt cover. The timing belt cover is located at the front of the engine. It is held in place by a few bolts. Remove the bolts and then carefully pry the cover off.
2. Rotate the crankshaft until the piston in cylinder number one is at TDC. You can do this by turning the crankshaft pulley bolt clockwise until the piston in cylinder number one reaches the top of its stroke. You can also use a piston stop to hold the piston at TDC.
3. Align the timing marks on the camshaft sprockets with the marks on the cylinder head. There are two timing marks on each camshaft sprocket. One mark is for the intake camshaft, and the other mark is for the exhaust camshaft. The marks on the camshaft sprockets must be aligned with the corresponding marks on the cylinder head.
4. Install the timing belt. Once the timing marks are aligned, you can install the timing belt. Start by wrapping the belt around the crankshaft pulley. Then, wrap the belt around the idler pulley. Finally, wrap the belt around the camshaft sprockets.
5. Tension the timing belt according to the manufacturer's specifications. Once the timing belt is installed, you need to tension it according to the manufacturer's specifications. This can be done using a timing belt tensioner.
6. Install the timing belt cover. Once the timing belt is tensioned, you can install the timing belt cover. Replace the bolts that you removed earlier and then carefully snap the cover into place.
By following these instructions, you can set the camshaft timing on the 2.0L Daewoo Nubira engine.
