Auto >> AutoSPT >  >> Engine

How long would it take to replace a steering pump in Dodge Durango?

The time it takes to replace a steering pump in a Dodge Durango depends on the year, make, and model of your vehicle, as well as your level of mechanical experience. In general, it can take anywhere from 2 to 4 hours to replace a steering pump. Here are the basic steps involved in replacing a steering pump:

1. Gather the necessary tools and parts. You will need a socket set, a wrench set, a screwdriver set, a funnel, and a new steering pump.

2. Disconnect the battery. This will help prevent any electrical accidents while you are working on the vehicle.

3. Remove the serpentine belt. This will allow you to access the steering pump.

4. Disconnect the pressure hose and return hose from the steering pump. Be sure to catch any fluid that leaks out.

5. Remove the steering pump mounting bolts. These are usually located on the front and back of the pump.

6. Remove the old steering pump. Be careful not to damage any of the surrounding parts.

7. Install the new steering pump. Reverse the steps you took to remove the old pump.

8. Reconnect the pressure hose and return hose. Be sure to tighten the hoses securely.

9. Install the serpentine belt.

10. Reconnect the battery.

Once you have replaced the steering pump, you will need to bleed the air from the system. To do this, start the engine and turn the steering wheel all the way to the left and then all the way to the right. Repeat this process several times until the steering wheel turns smoothly.

If you are not comfortable performing this repair yourself, you can take your vehicle to a qualified mechanic. They will be able to replace the steering pump quickly and safely.