1. Valve Cover:
- Locate the valve cover on your lawn tractor engine.
- Remove the valve cover and inspect the inside of the cover for a suitable location for a fuel pump. Look for a flat surface where you can mount the fuel pump without obstructing any moving parts.
- Mark the location and drill a hole of the appropriate size for your fuel pump.
- Install the fuel pump in the drilled hole and secure it using the provided mounting hardware.
- Connect the fuel inlet and outlet ports of the fuel pump to the appropriate fuel lines.
2. Intake Manifold:
- Locate the intake manifold on your lawn tractor engine.
- Remove the intake manifold and inspect the inside of the manifold for a suitable location for a fuel pump. Look for a flat surface where you can mount the fuel pump without obstructing any passages or ports.
- Mark the location and drill a hole of the appropriate size for your fuel pump.
- Install the fuel pump in the drilled hole and secure it using the provided mounting hardware.
- Connect the fuel inlet and outlet ports of the fuel pump to the appropriate fuel lines.
Note:
- Make sure to use the correct type of fuel pump for your engine and fuel system.
- Use high-quality fuel-resistant hoses and fittings to connect the fuel lines to the pump.
- Verify that all connections are secure and free from leaks before starting the engine.
