1. Park the vehicle on a level surface and apply the parking brake.
2. Open the trunk of the vehicle.
3. Locate the fuel pump access cover on the trunk floor. It is usually located near the center of the trunk, under the carpet.
4. Remove the fuel pump access cover by unscrewing the screws that hold it in place.
5. Cut a hole in the trunk floor that is large enough to access the fuel pump. The hole should be about 6 inches in diameter.
6. Clean the edges of the hole with a wire brush or sandpaper to remove any sharp metal.
7. Seal the edges of the hole with a sealant to prevent water and dirt from entering the fuel tank.
8. Replace the fuel pump access cover.
9. Start the vehicle and check for any leaks.
