1. Gather your tools and materials. You will need:
* A new fuel filter
* A fuel filter wrench
* A screwdriver
* A funnel
* Gasoline
2. Prepare your ATV. Turn off the engine and let it cool down. Disconnect the battery.
3. Locate the fuel filter. It is located under the seat, near the fuel tank.
4. Remove the old fuel filter. Use the fuel filter wrench to loosen the filter and then unscrew it by hand. Be careful not to spill any gas.
5. Install the new fuel filter. Screw the new filter onto the fuel line by hand. Tighten it until it is snug.
6. Reattach the fuel line. Reconnect the fuel line to the fuel filter and tighten the clamp.
7. Fill the fuel tank. Use the funnel to add gas to the fuel tank.
8. Reconnect the battery.
9. Start the ATV and let it run for a few minutes. Check for any leaks.
Tips
* When you change the fuel filter, it is also a good idea to clean the fuel tank.
* If you are having trouble removing the old fuel filter, you can try using a penetrating oil.
* Be careful not to over-tighten the fuel filter. This could damage the filter or the fuel line.
