[Image of serpentine belt routing diagram]
Belt Routing:
1. Crankshaft Pulley
2. Water Pump
3. Idler Pulley
4. Power Steering Pump
5. A/C Compressor
6. Tensioner Pulley
Additional Notes:
* The tensioner pulley is a spring-loaded pulley that maintains the proper tension on the belt.
* The idler pulley is a non-adjustable pulley that helps to guide the belt around the engine.
* The power steering pump and A/C compressor are driven by the belt.
* The water pump is driven by the belt, which circulates coolant through the engine.
To replace the serpentine belt:
1. Disconnect the battery.
2. Remove the air intake tube.
3. Remove the idler pulley.
4. Remove the old belt.
5. Install the new belt.
6. Reinstall the idler pulley.
7. Reinstall the air intake tube.
8. Reconnect the battery.
Tips:
* Make sure that the new belt is the same size as the old belt.
* When installing the new belt, make sure that it is properly seated in all of the pulleys.
* Apply a belt dressing to the new belt to help extend its life.
