1. Identify the Existing Wiring:
- Locate the wiring harness in the dashboard of your 1995 Hyundai Accent.
2. Wire Color Identification:
- Typically, wires in car audio systems have standardized colors that indicate their functions.
3. Matching Wires:
- Once you identify the wires in the vehicle's existing wiring harness, refer to the color coding information below to match them with the appropriate wires on the new stereo receiver.
Wiring Color Assignments:
| Wire Color | Function |
| ----------- | -------- |
| Black | Ground |
| Red | Constant Power |
| Yellow | Switched Power |
| Blue | Antenna Power |
| White/White with Stripe | Front Left Speaker Positive |
| White/Black Stripe | Front Left Speaker Negative |
| Gray/Gray with Stripe | Front Right Speaker Positive|
| Gray/Black Stripe | Front Right Speaker Negative |
| Green/Green with Stripe | Rear Left Speaker Positive |
| Green/Black Stripe | Rear Left Speaker Negative |
| Violet/Violet with Stripe | Rear Right Speaker Positive |
| Violet/Black Stripe | Rear Right Speaker Negative |
4. Speaker Wiring:
- Match the speaker wires according to the corresponding channels (front left, front right, rear left, rear right) on the new stereo receiver.
5. Connect RCA Cables (if applicable):
- If your new stereo receiver has RCA inputs for audio components like amplifiers or external CD changers, match and connect the corresponding RCA cables.
6. Final Steps:
- Double-check all connections to ensure they are secure.
- Reconnect the battery or turn on the car's ignition to power up the new stereo system.
Remember, if you encounter any complications while changing the stereo system, referring to the service manual or seeking professional assistance from an experienced car audio installer is recommended. They can ensure a proper and safe installation, preventing any potential damage to the electrical system or the new stereo equipment.
