1. Gather the necessary tools and materials.
- You will need a Phillips-head screwdriver, a flat-head screwdriver, and a new brake light bulb.
2. Open the rear hatch of the S-Max.
3. Locate the upper brake light.
- The upper brake light is located at the top of the rear window, in the center.
4. Remove the screws holding the brake light in place.
- There are two screws that hold the brake light in place.
- Use a Phillips-head screwdriver to remove the screws.
5. Remove the old brake light.
- Once the screws are removed, you can pull the brake light out of its housing.
6. Disconnect the electrical connector.
- The electrical connector is located on the back of the brake light.
- Use a flat-head screwdriver to release the connector.
7. Install the new brake light.
- Insert the new brake light into the housing.
- Make sure that the electrical connector is properly seated.
8. Secure the new brake light.
- Use the two Phillips-head screws to secure the new brake light in place.
9. Test the brake light.
- Turn on the headlights and step on the brake pedal.
- The new brake light should illuminate.
10. Close the rear hatch of the S-Max.
