1. Park your tractor on level ground and turn off the engine. Engage the parking brake.
2. Open the hood.
3. Locate the fuel filter. It is usually a cylindrical-shaped housing located near the top of the engine.
4. Place an oil drain pan under the fuel filter to catch any fuel that spills.
5. Use a wrench to loosen the bolt at the bottom of the fuel filter.
6. Remove the bolt and allow the fuel to drain into the drain pan.
7. Remove the fuel filter housing.
8. Remove the old fuel filter from the housing.
9. Insert the new fuel filter into the housing. Make sure that the gasket is properly seated.
10. Reinstall the fuel filter housing and tighten the bolt.
11. Start the engine and check for leaks.
