1. Locate the fuel filter:
- The fuel filter is located in the engine compartment, near the firewall on the passenger side.
- It's a cylindrical-shaped component with two fuel lines connected to it.
2. Prepare for the change:
- Relieve the fuel system pressure by turning the ignition key to the "ON" position for a few seconds without starting the engine.
- This step will minimize the amount of fuel that spills out when you disconnect the fuel lines.
3. Disconnect the fuel lines:
- Use a pair of pliers to loosen the hose clamps securing the fuel lines to the fuel filter.
- Be careful not to spill any fuel.
4. Remove the old fuel filter:
- Once the fuel lines are disconnected, you can unscrew the fuel filter from its housing.
- Use a wrench to loosen the filter if necessary.
5. Install the new fuel filter:
- Screw the new fuel filter into the housing, hand-tightening it until it's secure.
- Don't overtighten as it can damage the filter.
6. Reconnect the fuel lines:
- Reattach the fuel lines to the fuel filter and secure them with the hose clamps.
7. Start the engine:
- Turn the ignition key to the "ON" position and let the fuel pump prime the system for a few seconds.
- Start the engine and check for any fuel leaks.
8. Test the fuel system:
- Take your Renault Espace for a short test drive to ensure the fuel filter is functioning properly and that there are no leaks.
Note: It is essential to follow the correct procedure and take safety precautions when changing the fuel filter, especially when dealing with fuel under pressure. If you are unsure about any of the steps, it is recommended to seek assistance from a qualified mechanic to avoid potential risks or damage to your vehicle.
