1. Park your vehicle on a level surface and turn off the engine.
2. Open the hood of your vehicle.
3. Locate the low beam bulb cover on the back of the headlight assembly. It is usually held in place by a rubber grommet or a twist lock.
4. Remove the low beam bulb cover by gently pulling it off or turning it counterclockwise.
5. Locate the low beam bulb inside the headlight assembly. It is usually held in place by a metal clip or a bayonet mount.
6. Disconnect the electrical connector from the low beam bulb by gently pressing on the release tab and pulling it straight out.
7. Remove the old low beam bulb by turning it counterclockwise and pulling it out of the headlight assembly.
8. Insert the new low beam bulb into the headlight assembly and turn it clockwise to lock it in place.
9. Reconnect the electrical connector to the low beam bulb.
10. Replace the low beam bulb cover and secure it in place.
11. Close the hood of your vehicle.
12. Turn on the low beam headlights to verify that the new bulb is working properly.
Note: If you have difficulty reaching the low beam bulb, you may need to remove the air intake duct or the battery to access the headlight assembly. It's important to refer to your vehicle's owner's manual for specific instructions and precautions.
