- A Phillips head screwdriver
- A flat head screwdriver
- A pair of pliers
Instructions:
1.) Turn off the engine and remove the keys from the ignition.
2.) Remove the two Phillips head screws that secure the radio faceplate to the dashboard.
3.) Use the flat head screwdriver to pry the radio faceplate off the dashboard.
4.) Disconnect any wires that are connected to the radio faceplate.
5.) Remove the four Phillips head screws that secure the radio to the mounting bracket.
6.) Use the pliers to remove the two nuts that secure the radio to the antenna and power cables.
7.) Pull the radio out of the dashboard.
8.) Reconnect the antenna and power cables to the radio.
9.) Slide the radio back into the dashboard and secure it with the four Phillips head screws.
10.) Replace the radio faceplate and secure it with the two Phillips head screws.
