1. Locate the oil change reset button. It is typically located on the dashboard, near the odometer.
2. Press and hold the oil change reset button for a few seconds. The oil change light should turn off.
3. If the oil change light does not turn off, you may need to reset the engine oil life system. To do this, you will need to use a scan tool.
Here are some additional tips for resetting the oil change light on a Workhorse chassis:
* Make sure that the engine oil has been changed. The oil change light will not reset if the oil has not been changed.
* If you are using a scan tool to reset the engine oil life system, be sure to follow the instructions that came with the scan tool.
* If you have any questions about resetting the oil change light on your Workhorse chassis, consult your vehicle owner's manual.
