1. Disconnect the battery.
2. Drain the coolant.
3. Remove the accessory drive belt.
4. Remove the timing belt shield.
* To remove the timing belt shield, you will need to remove the following bolts:
* Two bolts that hold the shield to the front of the engine
* Two bolts that hold the shield to the engine mount
* One bolt that holds the shield to the water pump
5. Remove the water pump bolts and remove the water pump.
6. Clean the mating surface of the engine and the water pump.
7. Apply a thin coat of sealant to the mating surface of the water pump.
8. Install the new water pump and tighten the bolts.
9. Install the timing belt shield.
10. Install the accessory drive belt.
11. Fill the coolant system and reconnect the battery.
Here are some additional tips for changing the water pump on a 1994 Chrysler New Yorker:
* Make sure you have the right tools for the job. You will need a set of wrenches, a socket set, a screwdriver, and a pry bar.
* Before you start working on the engine, let it cool down completely.
* Be careful not to drop any bolts or nuts into the engine.
* If you have any questions, don't hesitate to consult with a professional mechanic.
