The horn relay and fuse are located under the hood. Look for the "Fuse and Relay" module that is located on the passenger side fender. To access the fuse and relay, remove the cover panel.
Fuse ID
The horn fuse should be labeled either" Horn" or "Horn PWR." The fuse is rated at 15 or 20 amps and should be a red color.
Relay ID
The horn relay should be labeled "Horn REL." If it is not labeled, simply locate the only other relay in the module.
Removal and Installation
To remove the fuse, use the fuse puller tool that is located in the fuse and relay module. Place the tool on the fuse and gently pull it out of its slot. To install a new fuse, insert it into the slot and push down until it clicks into place.
To remove the relay, disconnect the wiring connector and gently pull it out of its socket. To install a new relay, insert it into the socket and reconnect the wiring connector.
