- Socket set
- Wrench set
- Impact driver
- Timing chain removal tool
- Timing chain installation tool
- Camshaft holding tool
- Crankshaft holding tool
Procedure
1. Make sure the engine is cool before you begin.
2. Remove the serpentine belt.
3. Remove the water pump.
4. Remove the timing chain cover.
5. Remove the old timing chain.
6. Install the new timing chain.
7. Install the timing chain cover.
8. Install the water pump.
9. Install the serpentine belt.
10. Set the timing.
Detailed Instructions:
1._Disconnect the battery_ - This will prevent any electrical damage from occurring while you are working on the engine.
2._Remove the engine's front cover_ - There are several bolts and screws that hold this in place, so you will need a socket set and a wrench to remove them.
3._Locate the timing chain_ - It is located on the front of the engine, and it is connected to the camshafts and the crankshaft.
4._Loosen the timing chain tensioner_ - This will make it easier to remove the timing chain.
5._Remove the timing chain_ - To do this, you will need to use a timing chain removal tool.
6._Install the new timing chain_ - Make sure that the new chain is routed correctly, and then tighten the timing chain tensioner.
7._Reinstall the engine's front cover_ - Tighten all of the bolts and screws that you loosened when you removed the cover.
8._Reconnect the battery_ - This will restore electrical power to the engine.
9._Start the engine and check the timing_ - This can be done by using a timing light. Make sure that the timing marks are aligned correctly.
