1. Safety Precautions:
- Ensure the quad is parked on a level surface, and the engine is turned off.
- Disconnect the battery to prevent any electrical accidents.
2. Locate the Fuel Pump:
- The fuel pump is typically located inside the fuel tank.
- Remove the fuel tank cover or seat to access the fuel tank.
3. Remove the Fuel Lines:
- Disconnect the fuel lines connected to the fuel pump.
- Use a fuel line disconnect tool or pry them off gently.
- Be prepared for a small amount of fuel to spill.
4. Remove the Fuel Filter (if applicable):
- If the fuel pump has an attached fuel filter, remove it by unscrewing or unclipping it from the pump.
5. Remove the Fuel Pump:
- Unscrew the bolts or screws securing the fuel pump to the fuel tank.
- Carefully remove the fuel pump from the tank.
6. Inspect the Fuel Pump:
- Check the fuel pump for any visible signs of damage or corrosion.
- Replace the fuel pump if necessary.
7. Install the New Fuel Pump:
- Insert the new fuel pump into the fuel tank.
- Secure the fuel pump with the bolts or screws you removed earlier.
8. Reconnect the Fuel Lines:
- Reconnect the fuel lines to the fuel pump.
- Make sure the connections are secure and free from leaks.
9. Install the Fuel Filter (if applicable):
- Reinstall the fuel filter if you removed it earlier.
10. Reinstall the Fuel Tank Cover:
- Reattach the fuel tank cover or seat.
11. Connect the Battery:
- Reconnect the battery to restore power to the quad.
12. Test the Fuel Pump:
- Turn on the ignition and check if the fuel pump is priming.
- You should hear a faint buzzing or humming sound.
13. Start the Quad:
- Start the quad and ensure it is running smoothly.
- Check for any fuel leaks around the fuel pump and fuel lines.
Note: Always refer to your specific quad's service manual or consult with a certified mechanic if you are unsure about any of the steps or encounter difficulties during the process.
