Auto >> AutoSPT >  >> Auto Repair

How do you reset the check engine light on a 2002 Nissan Maxima 3.5 SE?

There are a couple of ways to reset the check engine light on a 2002 Nissan Maxima 3.5 SE.

Method 1: Using a scan tool

1. Connect the scan tool to your vehicle's diagnostic port.

2. Turn on the ignition.

3. Follow the prompts on the scan tool to navigate to the "Trouble Codes" or "DTCs" menu.

4. Select the check engine light code you want to reset.

5. Follow the prompts on the scan tool to reset the code.

Method 2: Disconnecting the battery

1. Disconnect the negative battery terminal from your vehicle's battery.

2. Wait at least 10 minutes.

3. Reconnect the negative battery terminal.

Method 3: Using a code reader

1. Turn on the ignition.

2. Plug the code reader into your vehicle's diagnostic port.

3. Follow the prompts on the code reader to read the check engine light code.

4. Follow the prompts on the code reader to reset the code.

Method 4: Driving your vehicle

In some cases, the check engine light may reset itself after driving your vehicle for a certain amount of time.

Auto Repair
How do you replace the fuel filter located on a 2003 Chevy Trailblazer? If you have an s10 with air can bypass the using a belt made for without and it still work?
Car Care
My Vehicle is Maintenance Free for the First 100,000 Miles! Why You Need a Wheel Alignment How To Change Power Steering Fluid
Engine
the best way to increase horse power on a 307 engine from 73 Chevy Nova? Do you use oil or grease in the front bearing hub a 92 Chevy 3500 diesel?
Electric Car
Where can one buy a pre owned VW? What is the spark plug gap on a 2005 Chevy Cobalt? Where is a transmission filter on 2000 Ford Expedition 5.4?
Autopilot
How do you test the crank angle sensor on a vr? How do you set the timing on a 2002 Honda Accord LX?
Car Photos
What kind of cars did they drive in the 1920s? What are the sizes of windshield wiper blades on 2003 Chrysler Town and Country? What were the differences between a car in 1940 and 1980?