2. Install the turbocharger manifold.
3. Install the turbocharger.
4. Install the charge pipe.
5. Install the intercooler.
6. Install the blow-off valve.
7. Install the wastegate.
8. Install the boost controller.
9. Install the fuel injector upgrade.
10. Install the ignition timing upgrade.
11. Install the wideband oxygen sensor.
12. Tune the engine.
Here are some additional tips for turbocharging a 5EFHE engine:
* Use a turbocharger that is sized for the engine. A turbocharger that is too large will not produce enough boost at low RPMs, while a turbocharger that is too small will not produce enough boost at high RPMs.
* Use an intercooler to cool the air before it enters the engine. This will help to prevent detonation and increase the engine's efficiency.
* Use a blow-off valve to prevent compressor surge when the throttle is closed.
* Use a wastegate to control the boost pressure.
* Use a boost controller to adjust the boost pressure.
* Install a wideband oxygen sensor to monitor the air/fuel ratio.
* Tune the engine to ensure that the air/fuel ratio is correct and the ignition timing is advanced.
