Auto >> AutoSPT >  >> Engine

What does a code mean on Kenmore front load dryer?

| Code | Meaning | Possible Causes | Solutions

|:------:|:----------------| :----------------:|:--------------------------|

| E1 | Control/Power | Defective control | Replace control board |

| E2 | Heater | Defective heater | Repair or replace the heater|

| E4 | Thermistor | Defective thermistor | Clean the thermistor|

| E6 | Door lock| Defective door switch or lock | Replace the door switch/lock|

| E7 | Drain pump | Faulty drain pump | Replace the drain pump|

| E9 | Pressure sensor | Defective pressure sensor | Clean or replace the pressure sensor|

| F01 | Water inlet valve | Defective water inlet valve | Replace the inlet valve |

| F10-11 | Door Switch | Faulty door switch | Replace the door switch

| F20 | Belt | Broken or loose belt | Replace the belt |

| F22 | Motor | Defective motor | Replace the motor |

| F30 | Overheat | Overheating of the dryer | Reduce the load size / Clean the lint filter |

| F71 | Temperature | Dryer is too hot | Clean the dryer vent, clean thermistor, check heating element |

| F81 | Dry time | Dryer taking too long to dry | Use correct cycle settings|

| F91 | Drum | Damaged or stuck drum | Replace drum bearing

| F99 | General Error | Undefined problem | Reset the dryer|