2. Loosen the hose clamp and disconnect the throttle body air hose from the throttle body.
3. Remove the throttle body cover and gasket using the appropriate tools.
4. Position the old gasket over the old throttle body and trace around it with a marker or thin sharpie.
5. Cut out the new gasket using a gasket cutter or scissors and a ruler following your traced lines.
6. Install the new gasket on the throttle body flange and secure it in place with the throttle body cover and bolts.
7. Reconnect the throttle body air hose to the throttle body and tighten the hose clamp.
8. Reinstall the air filter and air filter housing.
9. Start the engine and let it idle for a few minutes to allow the PCM to relearn the throttle position sensor.
