1.Check the safety switch. Make sure the safety switch is engaged and that the tractor is in neutral. The safety switch is usually located under the seat or on the side of the tractor.
2. Check the coil. The coil is responsible for providing the spark to the spark plug. Make sure the coil is properly connected and that there are no loose wires.
3. Check the spark plug wire. Make sure the spark plug wire is properly connected to the spark plug and the coil.
4. Check the battery. Make sure the battery is fully charged and that the terminals are clean and free of corrosion.
5.Check the ignition module. The ignition module is responsible for controlling the spark. Make sure the ignition module is properly connected and that there are no loose wires.
6.Check the ground wire. Make sure the ground wire is properly connected to the engine block.
7.Try a new spark plug. Even if the spark plug looks good, it may still be faulty. Try replacing the spark plug with a new one.
If you have checked all of these things and the tractor still has no spark, you may need to take it to a professional for further diagnosis and repair.
