1. Park the tractor on a level surface and turn off the engine.
2. Allow the tractor to cool for a few minutes.
3. Locate the hydraulic fluid reservoir, which is typically located on the left side of the tractor, behind the fuel tank.
4. Remove the dipstick from the reservoir and wipe it clean with a rag.
5. Reinsert the dipstick into the reservoir and check the fluid level. The fluid level should be between the "Full" and "Add" marks on the dipstick.
6. If the fluid level is low, add hydraulic fluid to the reservoir until the level reaches the "Full" mark.
7. Repeat steps 4-6 to check the transmission fluid level. The transmission fluid reservoir is typically located on the right side of the tractor, behind the fuel tank.
8. Once you have checked the fluid levels, replace the dipsticks and tighten them securely.
If you find that the hydraulic or transmission fluid is low, you should investigate the cause of the leak and repair it as soon as possible. Driving the tractor with low fluid levels can damage the hydraulic system or the transmission.
