Tools Needed:
- Phillips-head screwdriver
- New brake light bulb
Instructions:
- Park your Maxima in a safe location and turn off the engine.
- Open the Maxima’s trunk.
-Locate the brake light assembly on the side of the trunk lid; There are three screws holding the brake light assembly in place: two at the top and one at the bottom.
-Remove the screws using the Phillips-head screwdriver.
- Carefully remove the brake light assembly from the lid.
- Twist the old bulb counterclockwise to remove it from the socket.
- Install the new bulb by twisting it clockwise into the socket.
- Reattach the brake light assembly to the lid and replace and tighten the three screws.
- Test the brake lights to ensure that they are working properly.
- Close the trunk and you’re done!
