1. Park your car in a safe location and turn off the engine.
2. Open the trunk of your car.
3. Locate the taillight assembly that you need to replace. It is located in the rear of your car, on either side of the trunk lid.
4. Remove the two screws that hold the taillight assembly in place.
5. Pull the taillight assembly out of the car.
6. Disconnect the electrical connector that is attached to the taillight assembly.
7. Remove the old bulb from the taillight assembly.
8. Insert the new bulb into the taillight assembly.
9. Reconnect the electrical connector to the taillight assembly.
10. Reinstall the taillight assembly into the car.
11. Secure the taillight assembly with the two screws that you removed earlier.
12. Close the trunk of your car.
Your new tail light bulb should now be working.
