To remove the crankshaft sensor, follow these steps:
1. Disconnect the wire connector from the sensor.
2. Unbolt the sensor from the engine.
3. Pull the sensor out of the engine.
To install a new crankshaft sensor, simply reverse the steps above.
Here is a more detailed description of the location of the crankshaft sensor on a Renault Clio Mk1:
* The sensor is located on the front of the engine, just below the cylinder head.
* It is positioned between the oil filter and the water pump.
* The sensor is held in place by a single bolt.
* The wire connector for the sensor is located on the side of the sensor, facing towards the front of the car.
If you are having trouble finding the crankshaft sensor, you can consult a repair manual for your specific vehicle.
