* 8mm wrench
* Philips Head Screwdriver
* New Headlight
Instructions:
1. Open the front trunk lid and remove the plastic cover over the headlight.
2.Locate the screws holding the headlight in place and remove them.
3. Gently pull the headlight out of the housing being careful not to drop the headlight.
4. Disconnect the electrical connector from the back of the headlight.
5. Insert the new headlight into the housing and reconnect the electrical connector.
6. Replace the screws and tighten them until the headlight is secure.
7. Replace the plastic cover and close the front trunk lid.
