How do you add trans fluid to 1998 jaguar xj8?

Step 1: Gather the necessary materials.

You will need:

* Transmission fluid (Dexron III)

* Funnel

* Rags

* Jack

* Jack stands

Step 2: Prepare your vehicle.

Park your vehicle on a level surface. Apply the parking brake and chock the wheels. Turn off the engine and allow it to cool completely. Raise the vehicle using the jack and place it on the jack stands.

Step 3: Locate the transmission fluid filler tube.

The transmission fluid filler tube is located on the driver's side of the transmission. It is a black plastic tube with a yellow cap.

Step 4: Remove the filler cap.

Use the rag to wipe off any dirt or debris around the filler cap. Then, turn the cap counterclockwise to remove it.

Step 5: Add transmission fluid.

Insert the funnel into the filler tube. Slowly pour the transmission fluid into the funnel until it reaches the "Full" mark on the dipstick.

Step 6: Replace the filler cap.

Once the transmission fluid has been added, replace the filler cap. Turn the cap clockwise until it is snug.

Step 7: Lower the vehicle.

Use the jack to lower the vehicle off the jack stands.

Step 8: Check the transmission fluid level.

Start the engine and let it idle for a few minutes. Then, turn off the engine and check the transmission fluid level on the dipstick. The fluid level should be between the "Full" and "Add" marks on the dipstick.

Step 9: Clean up.

Wipe up any spilled transmission fluid with the rags. Dispose of the rags and funnel properly.