Here are the steps on how to remove the glove box:
1. Open the glove box.
2. On the left side of the glove box, there is a small tab that you need to press down on.
3. Once you have pressed down on the tab, you can pull the glove box out.
Once you have removed the glove box, you will be able to see the wiper module. It is located on the right side of the fuse box. The wiper module is a small black box with a green connector.
To remove the wiper module, you will need to disconnect the green connector. You can do this by using a small flat-head screwdriver. Once you have disconnected the green connector, you can remove the wiper module by gently pulling it out.
Installation is the reverse of removal.
