Where is the Coolant sensor location on a 1995 ford econoline van 5.8L F-250?

The coolant temperature sensor (CTS) on a 1995 Ford Econoline van with a 5.8L engine (Windsor V8) is typically located on the intake manifold. However, there's no single universally agreed-upon location. It could be on the passenger side or the driver's side of the intake manifold, often near the thermostat housing.

To find it:

1. Consult a Repair Manual: A repair manual specific to your 1995 Ford Econoline van E-series with the 5.8L engine is your best bet. These manuals have diagrams and precise locations.

2. Visual Inspection: With the engine cool, carefully examine the intake manifold. Look for a sensor with one or two wires connected to it. It's usually a fairly small sensor, often threaded into the intake manifold.

3. Follow the Wiring: If you can locate the wiring harness for the coolant temperature sensor, you can trace the wires back to the sensor itself.

4. Online Forums: Search online forums specific to Ford Econoline vans or V8 engines. Someone may have posted a picture of their CTS location.

Caution: Be careful when working around hot engine components. Allow the engine to cool completely before attempting any inspection or repair.