However, the general process for removing a rear seat in most cars, including likely this Lebaron, involves these steps:
1. Consult your owner's manual: This is the *most* important step. Your owner's manual should have a section on removing the rear seat, with diagrams and specific instructions. This is far superior to any generalized advice online.
2. Safety First: Disconnect the negative battery terminal to prevent accidental shorts or airbag deployment.
3. Locate retaining mechanisms: The rear seat is likely held in place by bolts, clips, or a combination of both. Carefully inspect the area under and around the seat. Look for bolts under seat covers, along the seat frame where it meets the car body, and along the seat's base.
4. Remove any covering: You might need to carefully remove any plastic covers or trim pieces to access the bolts or clips.
5. Remove the seatback (if separate): Many cars have separate seatbacks and seat bottoms. The seatback likely hinges forward or has release mechanisms. Locate these mechanisms; they may involve levers, buttons or pull straps.
6. Remove the seat bottom: Once the seatback is out (if applicable), tackle the seat bottom. You'll likely need to remove the bolts or clips holding it to the car's floor. These could be located along the seat's base, under the seat cushions or along the sides.
7. Lifting the seat: Once all the fasteners are removed, carefully lift the seat out. It might be heavy, so have someone help you if necessary.
Important Considerations for a Convertible:
* Additional fasteners: Convertibles often have extra reinforcement and bracing, meaning you might encounter more fasteners than a standard sedan.
* Top mechanism interference: Be extra cautious around the convertible top mechanism; you don't want to damage it.
* Weight distribution: The rear seats in a convertible might be lighter than in a coupe or sedan, due to the car's construction.
If you cannot find your owner's manual:
* Search online forums: Search for "1991 Chrysler Lebaron convertible rear seat removal" on forums dedicated to classic cars or Chrysler vehicles. Owners there may have posted photos or detailed instructions.
* Consult a mechanic: If you're not comfortable working on your car yourself, take it to a qualified mechanic. They'll have the expertise and tools to remove the seat safely and efficiently.
Remember to take your time and be methodical. Take photos as you go to aid in reassembly. Good luck!
