- Flat-head screwdriver
- Replacement mirror
Instructions
>1.) Park your car and turn off the engine. Allow your vehicle to completely cool down so you can safely handle the mirror.
>2.) Locate the small cover behind the side-view mirror. It is usually located on the inside of the door. Pry this cover off using the flat-head screwdriver. Be careful not to break the cover.
>3.) Locate the three bolts under the cover. Use the flat-head screwdriver to loosen these bolts. Be careful not to drop the bolts.
>4.) Once the bolts are loosened, grab the mirror and pull it towards you. It should pop off easily.
>5.) Install the replacement mirror by inserting it into the hole and tightening the three bolts.
>6.) Replace the small cover.
>7.) Test the mirror to make sure it is properly secured.
