2. Locate the two screws holding the tail light assembly in place.
They are located on the inside of the trunk, on the same side as the tail light.
3. Remove the two screws using a Phillips head screwdriver.
4. Pull the tail light assembly straight out of the trunk.
Be careful not to drop it.
5. Disconnect the electrical connector from the tail light assembly.
It is located on the back of the assembly.
6. Remove the tail light bulb by turning it counterclockwise.
7. Replace the tail light bulb with a new one, and then reinsert it into the tail light assembly.
8. Reconnect the electrical connector to the tail light assembly.
9. Push the tail light assembly back into the trunk, making sure that it is seated properly.
10. Replace the two screws that you removed in step 1.
11. Close the trunk of your 240sx.
