* A flat-head screwdriver
* A Phillips-head screwdriver
* A new rear light assembly
Instructions:
1. Park your Peugeot 508 in a safe location and turn off the engine.
2. Open the trunk of your Peugeot 508.
3. Locate the two screws that hold the rear light assembly in place. They are located on the inside of the trunk, near the edge of the rear light.
4. Use the flat-head screwdriver to remove the screws.
5. Once the screws are removed, carefully pull the rear light assembly out of the trunk.
6. Disconnect the electrical connector from the rear light assembly.
7. Remove the old light bulb from the rear light assembly.
8. Insert the new light bulb into the rear light assembly.
9. Reconnect the electrical connector to the rear light assembly.
10. Carefully insert the rear light assembly back into the trunk.
11. Use the Phillips-head screwdriver to reinstall the two screws that hold the rear light assembly in place.
12. Close the trunk of your Peugeot 508.
Tips:
* Be careful not to drop the screws when you remove them.
* If you are having difficulty removing the screws, you can use a penetrating oil to loosen them up.
* Be careful not to damage the electrical connector when you disconnect it.
* When you reinstall the rear light assembly, make sure that it is seated properly and that the screws are tightened securely.
