[Image of deck drive belt diagram]
Parts list:
1. Deck drive belt (part number: [part number])
2. Belt idler pulley (part number: [part number])
3. Belt tensioner pulley (part number: [part number])
4. Spindle pulley (part number: [part number])
5. Engine pulley (part number: [part number])
Installation instructions:
1. Remove the old deck drive belt by loosening the belt tensioner pulley and slipping the belt off of the pulleys.
2. Install the new deck drive belt by placing it around the pulleys in the following order: engine pulley, spindle pulley, belt tensioner pulley, belt idler pulley.
3. Tighten the belt tensioner pulley until the belt is snug, but not too tight.
4. Check the belt alignment and make sure that it is running smoothly.
Tips:
* To prevent the deck drive belt from slipping, make sure that the pulleys are clean and free of debris.
* If the deck drive belt is too loose, it may slip off of the pulleys.
* If the deck drive belt is too tight, it may damage the belt or the pulleys.
