- Replacement parking light bulb
- Flat-head screwdriver
- Phillips-head screwdriver
Instructions:
1. Park your Volvo V50 in a safe location, and turn off the engine.
2. Locate the parking light assembly. On the Volvo V50, the parking light assembly is located on the front bumper, near the headlight assembly.
3. Use the flat-head screwdriver to gently pry open the plastic cover of the parking light assembly.
4. Once the plastic cover is open, you will see the parking light bulb.
5. Use the Phillips-head screwdriver to loosen the screw that holds the parking light bulb in place.
6. Once the screw is loosened, you can remove the old parking light bulb from the assembly.
7. Insert the new parking light bulb into the assembly, and tighten the screw to hold it in place.
8. Replace the plastic cover of the parking light assembly, and you are done.
Note: If the parking light bulb does not work after replacing it, you may need to check the fuse for the parking lights. The fuse for the parking lights is located in the fuse box, which is usually located under the hood of the car.
