Tools Required:
- Flat-head screwdriver
- Phillips-head screwdriver
- New side mirror glass
Instructions:
1. Remove the Inner Door Panel:
Open the door and remove the plastic cover of the door handle using the flat-head screwdriver.
Unscrew the Phillips-head screws holding the inner door panel in place. Be mindful of any hidden screws that may be concealed under plastic caps or covers.
Gently pry the inner door panel away from the door, starting from one corner and working your way around. Be careful not to damage any clips or connectors attached to the panel.
Disconnect any electrical connectors or cables attached to the inner door panel, such as the window switch or mirror adjuster.
Set aside the inner door panel in a safe place.
2. Locate the Mirror Housing:
Behind the inner door panel, you'll find the side mirror housing. It is usually held in place by three bolts.
3. Remove the Mirror Housing:
Use the Phillips-head screwdriver to loosen and remove the three bolts holding the mirror housing in place.
Once the bolts are removed, carefully pull the mirror housing out from the door.
4. Remove the Old Mirror Glass:
Inside the mirror housing, you'll see the old side mirror glass. It is usually held in place by clips or adhesive.
Locate and release the clips or carefully remove the adhesive to separate the old mirror glass from the housing.
Be careful not to drop or damage the old mirror glass.
5. Install the New Mirror Glass:
Align the new side mirror glass with the housing, making sure it fits snugly into the clips or adhesive attachments.
Press firmly on the glass to ensure it is securely seated in place.
6. Reattach the Mirror Housing:
Reinsert the mirror housing back into the door, aligning it with the mounting holes.
Replace the three bolts you removed earlier to secure the mirror housing.
Tighten the bolts securely, but avoid over-tightening.
7. Reconnect Connectors and Reinstall the Inner Door Panel:
Reconnect any electrical connectors or cables that you disconnected earlier.
Reinstall the inner door panel by aligning it properly and securing it with the Phillips-head screws.
Replace the plastic cover of the door handle.
8. Test the Side Mirror:
Adjust the new side mirror glass to ensure it provides the desired view and field of vision.
By following these steps, you should be able to successfully change the side mirror glass of your Renault Clio 2002 model.
