1. Park your van on a level surface. Turn off the engine and allow it to cool.
2. Open the hood of your van.
3. Disconnect the negative terminal from your van’s battery.
4. Remove the plastic screws holding the front bumper in place.
5. There are two screws on each side of the bumper, and two at the bottom center of the bumper.
6. Gently pry the front bumper away from the van body, starting from one side and working your way around.
7. Once the bumper is removed, locate the fog light connectors. They will be located behind the fog light housings.
8. Disconnect the fog light connectors.
9. Remove the fog lights by turning them counterclockwise.
10. Install the new fog lights by turning them clockwise.
11. Reconnect the fog light connectors.
12. Replace the front bumper by pushing it back into place and reinstalling the plastic screws.
13. Reconnect the negative terminal of your van’s battery.
Your fog lights should now be working properly.
Here are some tips for installing froglights on your Fiat Scudo van:
* Choose froglights that are the right size and shape for your van.
* Make sure that the froglights are securely mounted.
* Test the froglights to make sure that they are working properly.
