1. Park the car in a safe location and turn off the engine.
2. Open the trunk.
3. Locate the rear light assembly that contains the indicator.
It is usually located on the side of the trunk.
4. Remove the screws that hold the rear light assembly in place.
There may be two or three screws.
5. Carefully pry the rear light assembly out of the car.
Be careful not to damage the paint or the light assembly.
6. Disconnect the electrical connector from the rear light assembly.
7. Remove the old indicator bulb from the rear light assembly.
Twist the bulb counterclockwise to remove it.
8. Insert the new indicator bulb into the rear light assembly.
Twist the bulb clockwise to secure it.
9. Reconnect the electrical connector to the rear light assembly.
10. Reinstall the rear light assembly in the car.
11. Secure the rear light assembly with the screws that you removed.
12. Close the trunk.
13. Test the new indicator to make sure that it is working properly.
Turn on the hazard lights and check to make sure that both indicators are flashing.
