1. Locate the two screws that hold the lens cover in place. They are located on the back of the lens cover, near the top and bottom.
2. Use a Phillips-head screwdriver to remove the two screws.
3. Carefully pry the lens cover off the truck. It may be necessary to use a flat-head screwdriver or a putty knife to help pry the lens cover off.
4. Once the lens cover is removed, you can access the tail light bulb.
To replace the tail light bulb, follow these steps:
1. Remove the old tail light bulb by turning it counterclockwise.
2. Insert the new tail light bulb by turning it clockwise until it is snug.
3. Replace the lens cover by snapping it into place.
4. Replace the two screws that hold the lens cover in place.
