- A Phillips head screwdriver
- A flat head screwdriver
Steps:
1. Turn off the ignition and remove the key from the ignition.
2. Pry off the panel underneath the radio controls and ashtray
3. Remove the two Phillips head screws that are attaching the radio to the dash.
4. Gently pull the radio out of the dash, being careful not to damage the wire connections.
5. Disconnect the electrical connectors attached to the rear of the radio:
• FM/AM Antenna
• Power Plug and Speakers
6. If required, install the new radio by matching new radio plug/wires with matching car colors for power/speakers/antenna and reinstall in reverse order
