Auto >> AutoSPT >  >> Car Photos

How do you change the tail light bulbs on a 1997 Toyota Celica GT?

To change the tail light bulbs on a 1997 Toyota Celica GT, follow these steps:

1. Open the trunk.

* On the inside surface of the trunk lid on the driver's side, you'll see a panel next to the light housing.

* Use a flathead screwdriver to gently pry off this panel.

2. Remove the old bulb.

* Once the panel is removed, you'll see the tail light housing.

* Give the socket a quarter turn counterclockwise and pull it straight out.

* Grab the bulb and rotate it counterclockwise to remove it from its socket.

3. Install the new bulb.

* Insert the new bulb into the socket by aligning the pins on the bulb with the holes in the socket and twisting the bulb clockwise.

* Push the socket back into the tail light housing and twist it clockwise until it clicks into place.

4. Replace the panel.

* Snap the panel back into place on the inside surface of the trunk lid.

Now you have successfully changed the tail light bulb in your 1997 Toyota Celica GT.