-Replacement brake light bulb
-Flat-head screwdriver
-Phillips-head screwdriver
Instructions
1. Park your Santa Fe in a safe location and turn off the engine.
2. Open the rear hatch of the Santa Fe and locate the brake light.
3. Use a flat-head screwdriver to pry open the plastic cover of the brake light.
4. Remove the old brake light bulb by turning it counterclockwise.
5. Insert the new brake light bulb by turning it clockwise until it is snug.
6. Replace the plastic cover of the brake light.
7. Test the new brake light by pressing on the brake pedal. The brake light should illuminate.
8. Close the rear hatch of the Santa Fe and you're done!
